Essential when removing and replacing axle shaft retaining collar. Supplied with a range of adaptors to suit the models below.

Models:
1948 onwards Car
1948 onwards L-R
3 Litre
Part No. 275870
Adaptor for 3 Litre Part No. 514576

Extractor, differential pinion rear bearing *

Required for all differentials with taper roller bearings on the pinion shaft.

Models:
1950 onwards Car
1950 onwards L-R
3 Litre
Part No.2ó2757

Press block, differential pinion rear bearing *

Must be purchased with Tool No. 68 as the cross-piece is common to both.

Models:
1950 onwards Car
1950 onwards L-R
3 Litre
Part No. 262758 (block only)

Gauge, differential pinion setting *

In use, the tool provides a dimension of 3.000 in. from the pinion to the crownwheel centre- line.

Models:
1948 onwards Car
1948 onwards L-R
3 Litre
Part No. 530104

Spanner, crownwheel locking nuts #

Facilitates setting the position of the crownwheel.

Models:
1948 onwards Car
1948 onwards L-R
3 Litre
Part No. 530105

Bracket for indicator, differential backlash:

The use of a dial test indicator is the only reliable method of setting backlash.

Models:
1948 onwards Car
1948 onwards L-R
3 Litre
Part No. 530106

Spanner for differential flange

Facilitates holding the differential flange when tightening nut retaining flange.

Models:
All Car and L-R
3 Litre
Part No, 530105